No. 1005 - Environmental Health and Safety Policy

Recently Updated

Policy | Safety and Health

Comment

Policy | Safety and Health

Author
Dennis Nolan, Executive Director of Environmental Health and Safety, Environmental Health & Safety
Owner
Amy Orders, Associate Vice President for Public Safety, Public Safety
Affected Party
Undergraduate Students, Graduate Students, Staff, Faculty, Others
Contact

This policy was recently updated

1.0 Purpose

This Policy establishes environmental, health and safety (EHS) requirements for all university activities. Safety, health, and sustainable practices are shared responsibilities of the Virginia Tech community. The university is committed to maintaining a safe and healthy living, learning, and working environment for employees, students, and visitors. This policy affirms the university's commitment and provides framework for achieving excellence in EHS performance.

2.0 Policy

This policy applies to all university employees, students, contractors, vendors, and volunteers, and visitors. The university is committed to complying with all applicable environmental, health, and safety laws, regulations, policies, and procedures, and has charged the Office of Environmental Health and Safety (EHS) with developing, maintaining and enforcing requirements, procedures, protocols, and guidelines to that end.

Members of the university community must comply with this policy and all applicable safety requirements and regulations. Appropriate reporting must be followed based on the following guidelines:

  • For all accidents, job-related illnesses, and injuries, complete the Employer’s Accident Report, when required by University Policy 4415: Workers’ Compensation and provide to Human Resources;
  • Complete the EHS Incident Report for any accidents, near-misses, job-related illnesses, injuries, and incidents (e.g., spills, fires, explosions) that are not reported using the Employer’s Accident Report and report to supervisors and EHS.

3.0 Responsibilities

Members of the university community are expected to be familiar with applicable policies and procedures, their safety responsibilities and practices, and to act proactively to prevent accidents and injuries and communicate hazards. This includes applying safe work practices, supporting and promoting a culture of safety, and conducting prudent housekeeping practices.

Environmental Health and Safety (EHS)

Virginia Tech EHS provides oversight, guidance, and technical assistance to promote safe environmental, health and safety operations. The Executive Director of Environmental Health and Safety, or designee, has the authority to immediately suspend, restrict, or direct the cessation of any activities that present:

  • an immediate danger to the health, safety, or welfare of persons, property or environment;
  • significant or repeated noncompliance with this policy; or
  • violations of environmental health and safety regulations.

In the event the Executive Director requires the termination of an activity or operation, EHS will immediately communicate to the individual(s) involved and their immediate supervisor. Notice will be provided to the department head, Associate Vice President for Public Safety, Vice President or Dean, and any regulatory agencies as required by law. Resumption of activities will require the approval of the Executive Director of EHS, who will coordinate with Administrative, Academic and Research offices as needed or required.

Responsibilities of Virginia Tech EHS:

  1. Advise the university community regarding the Environmental, Health and Safety Policy responsibilities through timely updates and consultations;
  2. Partner with academic and non-academic units and University stakeholders to promote safety and compliance through communications, inspections, trainings and consultations;
  3. Develop programs, guidelines and training required by federal and state regulations and supports environmental stewardship;
  4. Conduct reviews and inspections to verify safe practices;
  5. Evaluate all activities with a safety, health or environmental connection, inspect, sample or monitor potentially hazardous conditions in buildings and facilities including, but not limited to, laboratories, clinics, animal use facilities, greenhouses, machine shops, maintenance areas, classrooms, and offices;
  6. Serve as the primary point of contact with EHS-related regulatory bodies and external agencies, submit and maintain regulatory documents (such as licenses, registrations, permits, reports, etc.), as required and coordinate with University Legal Counsel as needed;
  7. Review hazardous assessments, workplace controls, procedures, and personal protective equipment needed to protect personnel;
  8. Conduct investigations and analyses of near misses, accidents and injuries;
  9. Evaluate all university activities and campus events with a safety, health or environmental connection for compliance with federal, state, local, and university environmental, health, and safety laws, regulations, ordinances, and policies; identify noncompliant situations, require appropriate corrective actions, and escalate to appropriate leadership when timely corrections are not accomplished;
  10. Provide guidance and support for the decommissioning laboratories, facilities, equipment and processes as requested;
  11. Dispose of hazardous materials according to state and federal regulatory requirements;
  12. Execute responsibilities involving inspection and enforcement delegated to EHS by any standing university safety committee;
  13. Support university building and fire code compliance and drills where required;
  14. Review plans and specifications for new construction and renovation projects for compliance with safety and environmental requirements.

3.1 Employees, Students, Volunteers, or Trainees

All members of the Virginia Tech community are expected to conduct activities in a safe manner and in compliance with applicable policies, laws, and regulations.

Responsibilities, as applicable, of employees, students, volunteers, or trainees:

  1. Complete all required environmental health and safety training as directed by EHS or the university;
  2. Follow established environmental, health, and safety procedures;
  3. Participate in exposure monitoring and occupational health programs when appropriate or required;
  4. Wear or use required personal protective equipment and use established engineering controls;
  5. Report unsafe practices, hazardous conditions, and/or potential violations of regulations to your supervisor;
  6. Participate and cooperate with facility inspections and incident investigations;
  7. Educate visitors, contractors or vendors as to their responsibilities under this policy.

3.2 Faculty, Principal Investigators, Lab Managers and Supervisors

All employees involved in instructional and/or research programs are responsible for documenting that the students in their courses and laboratories are properly trained and educated about applicable safety and health policies and practices prior to exposure to instructional or research hazards.

Responsibilities of faculty, principal investigators, lab managers, and supervisors:

  1. Utilize applicable EHS training programs, and develop and conduct mandatory site-specific training for all employees, students, and visitors as required by EHS programs, and document this training in the Safety Management System (SMS);
  2. Promote a culture of safety by applying safe work and housekeeping practices, in all spaces, with all equipment. Provide and require proper use of safety equipment and personal protective equipment;
  3. Conduct hazard assessments and report any safety concerns to EHS. Implement appropriate engineering controls and/or use of personal protective equipment and document the actions taken. Maintain these hazard assessments in writing;
  4. Perform annual health and safety self-audits of work areas and/or spaces under their control and submit results to EHS;
  5. Cooperate and participate in the EHS inspection process as necessary and correct deficiencies in a prompt manner as specified in the inspection report;
  6. Dispose of different waste streams in accordance with university, state and federal requirements;
  7. Evaluate research and instructional activities for potential safety and health exposure risks and take all reasonable steps to reduce or mitigate such exposures as outlined in “Guidelines on Safety in Research and Educational Activities”; Maintain these hazard assessments in writing. Implement appropriate engineering controls and/or the use of personal protective equipment and document the actions taken; consult with EHS when engineering controls require infrastructure changes.
  8. Maintain a current chemical inventory and submit a hazardous chemical registration to EHS through the SMS annually or whenever significant changes occur;
  9. When vacating or decommissioning a work area, comply with the EHS "Closeout Procedures for Laboratories/Work Areas;”
  10. Register any minors working in their laboratory and comply with university policy 4815: Minors at Virginia Tech and the EHS “Guidelines for Minors in the Workplace.”

3.3 Deans/Directors/Department Heads

It is the responsibility of Deans, Department Heads and Program/Unit Directors that each academic, research, administrative or auxiliary units under their authority conducts its operations in accordance with all applicable laws, regulations, and university policies and procedures.

Specific responsibilities of Directors and Department heads:

  1. Require employees, students and visitors under their direction, to complete required safety training before any work with hazardous chemicals, biohazardous agents, radiation, or physical/mechanical hazards;
  2. Resolve major noncompliance issues or repeat noncompliance with EHS;
  3. Incorporate workplace safety requirements and responsibilities into each appropriate job description;
  4. Coordinate the vacating and/or decommissioning of laboratories with EHS and assume ownership of hazardous materials, equipment and processes that cannot or should not be decommissioning while the space is in transition.

3.4 Executive Leadership

Executive Leadership provides appropriate financial and organizational support to assure Virginia Tech operations and activities are conducted safely and in compliance with applicable environmental, health, and safety laws and regulations. Executive Leadership approves and authorizes the implementation of policies and programs for safety and compliance, including the establishment of consequences for non-compliance, unsafe acts, or creating unsafe working conditions.

3.5 Contractors

It is the responsibility of the contractee to require their contractors to comply with this policy.

  1. Follow all applicable local, state and federal laws and regulations;
  2. Follow applicable university policies, procedures, and guidelines concerning environmental health and safety;
  3. Report incidents immediately to the project manager, supervisor, or hiring manager;
  4. Mitigate risk and ensure safety of the University community from injury and property damage in their work areas;
  5. Comply with Virginia Tech’s “Safety Requirements for Contractors and Subcontractors.”

3.6 University Committees

The following committees oversee specific regulatory or policy requirements including, where applicable, the review, approval or rejection of research, academic or special circumstance protocols.  The committee oversight partners work collaboratively with EHS that maintains regulatory compliance programming and documentation. EHS members serve as ex-officio on all committees.

Environmental Health and Safety Committee

  • The Virginia Tech Environmental Health and Safety Committee is a university operational committee with the authority to oversee university compliance with this policy.
  • Oversight: Environmental Health and Safety

Institutional Animal Care and Use Committee (IACUC)

  • Virginia Tech IACUC oversees all teaching uses and research involving vertebrate animal species (excluding human subjects), regardless of funding source. Animals cannot be obtained or used without prior protocol review and approval by the IACUC. As per federal law, the IACUC has the authority to approve, disapprove, or require modifications to be made to protocols to ensure regulatory compliance, and has the authority to suspend or terminate ongoing protocols if it is determined that inappropriate or unapproved activities involving animals are taking place.
  • Oversight: Scholarly Integrity and Research Compliance

Institutional Biosafety Committee (IBC)

  • The Virginia Tech IBC is charged with overseeing planning and implementation of requirements for the use of biohazardous materials. This includes agents infectious to humans, animals, and plants, recombinant DNA use, toxins of biological origin, select agents and toxins, human, non-human primate, and mammalian blood, blood products, cells, and unfixed tissue.
  • Oversight: Scholarly Integrity and Research Compliance

Institutional Review Board (IRB)

  • The IRB is a board of scientific and faculty peers, established in accordance with federal regulations required to review all proposed research involving human participants before it is implemented to ensure that it is scientifically valid, risks to participants are minimized to the extent possible, and that risks are reasonable relative to the expected benefits of the research.
  • Oversight: Scholarly Integrity and Research Compliance

Radiation Safety Committee

  • State and Federal regulations require that research involving radioactive materials, and ionizing radiation under our broad scope license undergo review by a board of scientific and faculty peers. The University Radiation Safety Committee (RSC) is directly responsible for approving and disapproving research protocols, and where necessary to shut down research operations utilizing ionizing radiation.
  • Oversight: Research and Innovation

4.0 Definitions

  • Engineering Controls – Engineering controls involve isolating a hazard or changing the way a task is performed to reduce exposure to a hazard. This often involves adding safety measures to make the work easier such as installing machine guards. Installing ventilation to remove fumes from the air is another example.
  • Hazard Assessment - a systematic process for identifying hazards, evaluating the risks presented by those hazards, and managing the risks of the hazards of the experiment to be performed by incorporating appropriate hazard controls into the experimental design process. More information on hazard assessments can be found on Hazard Assessments website.
  • Near Misses – an unplanned event that does not result in injury, illness or damage to property, but had the potential to do so. Near misses highlight potential hazards and system weaknesses, providing valuable insight for preventing future incidents.
  • University Community: Employees, faculty, students, volunteers, including minors, vendors, visitors who work in campus facilities or in partnership collaboration locations related to Virginia Tech.

5.0 References

  • Converted to Web · 11/11/2026

    • Approved by Office of the Vice President for Policy and Governance
  • Revision 7 · 10/22/2025

    Revised Policy in its entirety to clarify responsibilities and reformat.

    Approved October 22, 2025 by Amy Orders, Associate Vice President for Public Safety.

  • Revision 6 · 04/26/2019

    Clarified documentation requirements in some items under section 3.1.6.

    Approved April 26, 2019 by President Timothy D. Sands.

  • Revision 5 · 12/14/2016

    • Added subsection headers to section 3.1 for ease of navigation.
    • Additional responsibilities outlined in sections 3.1.5 and 3.1.6 related to reviews of instructional and research activity, and hazardous material storage, disposition, and decontamination.
    • Additional responsibility included in 3.1.7 related to use of personal protective equipment.
    • Technical updates to department and committee titles and references.

    Approved December 14, 2016 by President Timothy D. Sands.

  • Revision 4 · 12/2/2010

    Updated section 3.1 to include reference and description for the Safety and Security Policy Committee and to correct the title of the Health and Safety Committee; added requirement that Directors/Department Heads submit
    safety representative’s name annually to EHSS, as well as submit annually updated departmental emergency action plans (EAPs) and continuity of operations plans (COOPs) to the Office of Emergency Management; added sections stating the responsibilities of the Office of Emergency Management and the Office of Research Compliance; and updated the listing of committees that oversee regulatory and policy requirements and the listing of university policies, documents and programs related to health and safety.

    Approved December 2, 2010 by President Charles W. Steger

  • Revision 3 · 04/1/2008

    April 1, 2008: Updates to position titles and/or responsibilities due to university reorganization.

  • Revision 2 · 02/28/2007

    Changes to entire policy to update and clarify requirements and update information related to university committees that address safety and health issues at the university. 

    Approved February 28, 2007 by Executive Vice President and Chief Operating Officer, James A. Hyatt

  • Renumbered · 04/15/2003

    Policy 5800: Health and Safety Policy renumbered April 15, 2003 to Policy 1005 and moved to General University
    Policies list

  • Revision 1 · 05/6/2002

    Section 3.2. Asbestos Operations and Maintenance, and Lead hazards and Lead-Based Paint moved from Occupational Safety Division to Occupational Health and Industrial Hygiene Division. Machine Shop Safety and Scaffolding added to Occupational Safety Division.

  • Original Document · 01/10/2001

    Approved January 10, 2001 by the Vice President for Administration and Treasurer, Raymond D. Smoot, Jr

Last Revised Date: 11/11/2026

Effective Date: 01/10/2001